Changing The Gear Oil; Changing The Seat Hight - KTM 1998 50 SXR Adventure Owner's Handbook Manual

18
3
1
2
25 mm

Changing the gear oil *

The engine must be warmed up before changing the gear oil. Park the
motorcycle on a horizontal surface, remove the oil drain plug
the used oil into an appropriate container. Clean the sealing surface, mount
the oil drain plug together with the gasket and tighten with 15 Nm (11 ft.lb).
Lay the motorcycle on its side and add 0.25 l gear oil SAE 30 (ex. Shell
Advance VSX 4). Mount the plug
!
T
OO LITTLE OIL OR A POOR OIL QUALITY LEAD TO PREMATURE TRANSMISSION WEAR
T ,
HEREFORE ONLY USE BRANDED PRODUCTS
Changing the seat height
The seat height of all 50 SXR models can easily be increased by 25 mm (1 in).
The frame is provided with additional fastening points on which the tank
and the tail can be mounted. Thus, you can easily adjust the seat height as
your youngster grows.
1
and check the engine for leaks.
CAUTION
.
3
and drain
!
.