CE Labs MP700 Quick Start Manual

Series 7 – network-ready digital signage players

Hide thumbs Also See for MP700:

Instruction manual (52 pages)

page of 10

/ 10
Bookmarks

Quick Links

Download this manual See also: Instruction Manual

MP700/MP70

Series 7 – Network-ready

Digital Signage Players

This guide will explain the basic setup for

streaming video and audio to the MP700 and MP70 HD

media players using the CE labs QuickSign Pro 700 software.

Need help?

Do you have a question about the MP700 and is the answer not in the manual?

Questions and answers

Summary of Contents for CE Labs MP700

Page 1 MP700/MP70 Series 7 – Network-ready Digital Signage Players This guide will explain the basic setup for streaming video and audio to the MP700 and MP70 HD media players using the CE labs QuickSign Pro 700 software.
Page 2 THIS PAGE IS LEFT INTENTIONALLY BLANK...
Page 3: Before Getting Started
Before getting started: Streaming is very bandwidth intensive. Make certain in your application that your network has suffi cient bandwidth available. Be aware that streaming will consume a very large percentage of bandwidth and it is a good idea to put it on a separate network, if possible. You need a fast computer to supply the video stream.
Page 4 QuickSign Pro 700 Launch QuickSign Pro 700 and allow it to find the players on your network. You should see the target player(s) populated in the Media Player Table in the left column. Select the desired player from the table. ...
Page 5 QuickSign Pro 700 Click on CHANNELS and then on +New Channel. Add the desired name and description. Click on Stream (RTP) and then type the URL of the stream you created on your network. rtp://239.255.42.42:1234 Example: Click OK to save the new channel. ...
Page 6 QuickSign Pro 700 Click on Playlists and then on +New Playlist. Select Channels in the Media List and move the newly created channel into the playlist box. Add the desired name and description at the top of this dialog box ...
Page 7 Make certain you have the desired player selected in the left column and press Load / Play to send the Streaming Playlist to the player. If the Video Stream is active, the video will begin to play on the MP700/MP70 after about a 15-second buffer period. ...
Page 8 FAQ/Troubleshooting Tips: 1. I do not see a picture on the MP700. How can I verify the stream is active? a. Use another PC that is on the same subnet and open the video stream in the VLC media player application. If the stream is active, it should appear on the PC.
Page 9 THIS PAGE IS LEFT INTENTIONALLY BLANK...
Page 10 CE labs can support many areas of your audio and video distribution needs. We manufacture: • Digital Signage software and Media Players • HD Matrix Switchers • RF amplifiers • HDMI and Component HD distribution amplifiers • CAT 5 Signal Extenders •...

This manual is also suitable for:

Mp70