Advertisement
Quick Links
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at
www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
Document: HD300ZX_manual.pdf
930-2204-01 Rev B
HD300ZX
Digital Media
Player
All functions, specifications and images in this
manual may change without prior notice.
Please ask your sales representative for the
latest firmware and PDF version of the manual.
Advertisement
Related Manuals for CE Labs HD300ZX
Summary of Contents for CE Labs HD300ZX
- Page 1 CE labs can support many areas of your audio and video distribution needs. We manufacture: • Digital Signage software and Media Players • HD Matrix Switchers HD300ZX • RF amplifiers • HDMI and Component HD distribution amplifiers Digital Media • CAT 5 Signal Extenders Player •...
- Page 2 TABLE OF CONTENTS ABOUT THIS MANUAL CHAPTER 1 - INTRODUCTION CHAPTER 4 - PLAYBACK This manual covers all versions for the HD-300ZX and some of SYSTEM REQUIREMENTS Disk Management its optional accessories. Firmware, images and descriptions PC Requirements Scheduled Download may therefore slightly vary between this manual and the PLAYBACK MODES Display Panel Requirements...
-
Page 3: System Requirements
REMOTE CONTROL KEY FUNCTIONS CHAPTER 1 - INTRODUCTION Specially designed as an affordable yet advanced advertisement Item Button Browser Mode Playback Mode solution, Cable Electronics’s HD-300ZX offers an array of new and unique Power Power OFF Power OFF features. Small footprint and customisable firmware makes this the ideal 1 - .:/@ solution for networked advertisement displays and other broadcasts. - Page 4 REMOTE CONTROL KEY FUNCTIONS CHAPTER 5 - APPENDIX Detailed View The images below depict the standard HD-300ZX device showing the front view with its connections and the rear view with the LED lights. If your display is blank and you can not see the HD-300ZX menu, press the TV Mode button on your remote control to toggle between the different video Front View outputs.
-
Page 5: Remote Control
Manual & Standby Remote Control Playback mode with quick access to certain files via numeric buttons on the remote control from 000-999. This mode can be used for kiosks and other digital signage applications, where users may request certain information with the push of a button. - Page 6 Automated Play Modes There are 3 automated play modes and a standard mode. In the standard mode, the files can be accessed by using the remote control, like on any A: N/A B: N/A other media player. For automated playback, select either Repeat, Manual Playback Functions or Standby.
- Page 7 CHAPTER 2 - HARDWARE INSTALLATION Note: The HD-300ZX only supports the FAT32 file system or for CF cards also FAT16. 1. Install the CF card. 2. Switch the power on your HD-300ZX to ON, and wait for the system to boot.
- Page 8 Playback Modes CHAPTER 3 - SOFTWARE CONFIGURATION The HD-300ZX offers several different play modes. Some are pre-defined, some are flexible, some are passive and some require active user input. In following chapters, HD-300ZX is referring to all of the models, as the software is identical.
- Page 9 This address will settings manually. You will be able to enter the IP address, mask, allow the player to access the CE Labs CCM demo web site. gateway and DNS server. [IP Address] Displays the current IP address of your HD-300ZX.
- Page 10 Misc1 Category File Erase In this category, you can set the time using an NTP server via the internet. Once the time is set, you can configure the playlist, download function and 1. Press the SETUP button and go to File Erase in the MISC2 category. schedule for these functions.
- Page 11 Misc2 Category CHAPTER 4 - PLAYBACK In this category, you can manage your files using the copy and erase functions and set the playback mode for automated playback. A hard drive or CF card is installed and data is stored on the HD-300ZX. Use the arrow keys on your remote control for navigation and press the ENTER Each unit has its own storage but new content can automatically be button to configure the settings.
- Page 12 Misc3 Category 4. At this time, the date will still show 1970, so press the SETUP key on your remote control to exit the setup menu and then reboot the device. In this category, you can disable the onscreen messages (OSD) and configure Turn off the power switch, wait a few seconds and turn it back on.
- Page 13 Time & Date Audio & Video Category To set date and time on the HD-300ZX, the unit requires an internet connection In this category, you can configure the audio and video output of your to synchronise the time with an NTP server. HD-300ZX.
-
Page 14: Wireless Connection
Wireless Connection 5. Make sure the SSID is correct, otherwise select it again and enter the right name. The HD-300ZX comes with an optional wireless kit. If installed, it can connect wirelessly to the network using 802.11b or 802.11g. It supports WEP 64-bit and 128-bit encryption.
Need help?
Do you have a question about the HD300ZX and is the answer not in the manual?
Questions and answers