Humanware Prodigi DUO User Manual page 11

4. Connect the DC cable into the DC port (1). Then, insert the DVI
cable into the DVI port and tighten the 2 included screws (2).
Use the cable clip to attach the cables behind the screen (3).
IMPORTANT: The DVI cable only goes in one way. If it does
not slide in properly, flip it over.
5. The center of the screen should be at the same height as your
eyes, ideally 16 inches (40 cm) away. To adjust its position, lift
up or down, tilt forward or back, and swivel left or right.
1
3
Page 9
2