Networks; Shortcuts; Date / Time - Ecom Ex-Handy 05 Operating Instructions Manual

Call barring (Operator-dependent service)
This menu allows you to block the sending or reception of certain calls. Before
you can use this service, a password will be provided by your operator when you
take out your subscription.
On the Security menu, choose the Call barring menu and [Select].
Select Activate or Deactivate and validate.
Fixed dialling (Operator-dependent service)
This menu allows you to restrict the outgoing calls.
On the Security menu, choose the Fixed dialling menu and [Select].
Enter PIN2 number and validate.
Select Activate or Deactivate and validate. Proceed as for any other phonebook.
When activating this function, only the numbers stored in the phonebook can be
called.
This phonebook is linked to the SIM card, and its size depends on the card's
capacity.
Cost (Operator-dependent service)
This menu allows you to control the cost of your calls.
On the Security menu select the Cost menu and validate. The Cost menu (*) lets
you check the cost of the last call you made and of all the calls you made since
you last deleted them. The Delete costs menu (*) lets you delete the cost of your
last call and reset the cost counter. Enter your PIN2 code first.
Note: Depending on how the networks and associated subscription cards are
configured, some functions may be unavailable (these are marked out with *).

1.14.7 Networks

On the Settings menu, choose the Networks menu and [Select].
Choose Selection to activate (automatically or manually) one of the networks
accessible in the area where your are located.
Choose Preferred to view all the pre-registered networks.
Choose Network type to select your network.
Choose GPRS to select the way you want to be attached on the GPRS network
always, or only when needed (when launching a data connection).

1.14.8 Shortcuts

This menu allows you to allocate functions to the programmable keys: .
On the Settings menu, choose the Shortcuts menu and [Select].
Select the key that you wish to modify and validate.
Choose the function that you want to allocate to this key and validate.

1.14.9 Date / Time

Set Date/Time
On the Date / Time menu, select Set Date/Time and [Select].
60