Vertex Standard EVX-531 Service Manual page 18

CtCss d <w
eviation
This parameter is to align CTCSS Deviation of the selected channel.
1. Press the "CTCSS (W/N)" button to open the "CTCSS Devia-
tion Alignment" window.
2. Click the "PTT" button or press the "SPACE" bar of the com-
puter's keyboard to transmit the radio.
3. Set the value to get desired deviation (Nominal: Wide: 0.6 kHz,
Narrow: 0.35 kHz) on the deviation meter according to the fol-
lowing ways:
l Dragging the slide bar
l Clicking the arrow buttons
l Pressing the left/right arrow key of the computer's keyboard
l Entering the value ("–20.00" - "20.00") in the "Currend
Data" box from the computer's keyboard
4. After getting the desired deviation, click the "PTT" button or
press the "SPACE" bar to stop transmitting.
5. Click the "OK" button to finish the CTCSS Deviation align-
ment and save the data.
You may align the deviation level by any CTCSS tone frequency
(default: 67.0 Hz) by changing the value of the "CTCSS Freq" box
located at the bottom of the screen, if needed.
dCs d <w
eviation ide
This parameter is to align "DCS Deviation" of the selected channel.
1. Press the "DCS (W/N)" button to open the "DCS Deviation
Alignment" window.
2. Click the "PTT" button or press the "SPACE" bar of the com-
puter's keyboard to transmit the radio.
3. Set the value to get desired deviation (Nominal: Wide: 0.65
kHz, Narrow: 0.4 kHz) on the deviation meter according to the
following ways:
l Dragging the slide bar
l Clicking the arrow buttons
l Pressing the left/right arrow key of the computer's keyboard
l Entering the value ("–20.00" - "20.00") in the "Currend
Data" box from the computer's keyboard
4. After getting the desired deviation, click the "PTT" button or
press the "SPACE" bar to stop transmitting.
5. Click the "OK" button to finish the DCS Deviation alignment
and save the data.
You may align the deviation level by any DCS code (default: 532)
by changing the value of the "DCS Code" box located at the bot-
tom of the screen, if needed.
EVX-531 VHF Service Manual
> / <n >
ide arrow
> / <n >
arrow
Alignment
ê
ê
18