Disassembly Of Smps P.c.b - Panasonic SA-AKX70PH Service Manual

9.16. Disassembly of SMPS P.C.B.

• Refer to "Disassembly of Top Cabinet.".
• Refer to "Disassembly of Front Panel Assembly".
• Refer to "Disassembly of D-Amp P.C.B.".
Step 1 Remove 1 screw.
Step 2 Remove 4 screws.
Step 3 Detach 11P cable wire at the connector (CN5802) on
SMPS P.C.B..
Step 4 Lift up to remove SMPS P.C.B..
• For PH only
Step 5 Flip the SMPS P.C.B. and position it according to dia-
gram shown.
Caution: Insulated Material is required in order to insulated
SMPS P.C.B. from other parts.
Step 6 Desolder 2 Wire pins, Black TL7 (Black), TL8 (Red)
wires pin.
Step 7 Remove SMPS P.C.B..
45