Model DFR450X EC Declaration of Conformity Sound pressure level (L ) : 78 dB (A) Makita declares that the following Machine(s): Uncertainty (K) : 3 dB (A) Designation of Machine: The noise level under working may exceed 80 dB (A).
The technical file in accordance with 2006/42/EC is When operating a power tool outdoors, use an available from: extension cord suitable for outdoor use. Use of Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium a cord suitable for outdoor use reduces the risk of electric shock. 15.4.2014...
GEB050-2 19. Disconnect the plug from the power source and/or the battery pack from the power tool CORDLESS SCREWDRIVER before making any adjustments, changing SAFETY WARNINGS accessories, or storing power tools. Such preventive safety measures reduce the risk of Hold power tool insulated...
Do not expose battery cartridge to water FUNCTIONAL DESCRIPTION or rain. A battery short can cause a large current flow, overheating, possible burns and even a CAUTION: breakdown. Always be sure that the tool is switched off and the • Do not store the tool and battery cartridge in battery cartridge is removed before adjusting or locations where the temperature may reach or...
Page 6
Lithium-ion batteries with a star marking are equipped 1. Stopper base with a protection system. This system automatically cuts 2. Casing off power to the tool to extend battery life. 3. Adjusting knob The tool will automatically stop during operation if the tool and/or battery are placed under one of the following conditions: Overloaded:...
Page 7
ASSEMBLY 1. Driving position CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out any work on the tool. Installing or removing the bit Loosen the thumb screws which secure the casing. Pull 011579 out the casing in the direction of the arrow.
on the bit. This may also lead to poor fastening of OPERATION screws and malfunction of the tool. Driving operation MAINTENANCE CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before attempting to perform inspection or maintenance.
Use pliers to remove the carbon brush caps of the carbon If you need any assistance for more details regarding brushes. Take out the worn carbon brushes, insert the these accessories, ask your local Makita Service Center. new ones and replace the carbon brush caps in reverse. Drywall screw strip •...