Security Menu - Lenovo THINKSERVER 387 Hardware Maintenance Manual

Menu item
USB Configuration
(set USB configuration
parameters)
Console Redirection
Configuration (set console
redirection configuration
parameters)

Security menu

This topic provides information about the security related settings on the Security menu in the Setup
Utility program.
You can set passwords, the TPM feature, and other security features on the Security menu. The following
table shows the contents of the Security menu. For each menu item, press the Enter key to show selectable
options and select a desired option by using up and down arrow keys or type desired values from the
keyboard directly. Some items are displayed on the menu only if the server supports the corresponding
features.
Notes:
• Enabled means that the function is configured.
• Disabled means that the function is not configured.
• Default values are in boldface in the Selections column.
60
ThinkServer Hardware Maintenance Manual
Submenu item
Onboard LAN2 I/O ROM
PCI ROM Priority
USB Controller
Legacy USB Support
Port 60/64 Emulation
TANDBERGRDX 3040
Console Redirection
Selections
• Disabled
• Enabled
• Legacy ROM
• EFI Compatible ROM
• Disabled
• Enabled
• Enabled
• Disabled
• Auto
• Disabled
• Enabled
• Auto
• Floppy
• Forced FDD
• Hard Disk
• CD-ROM
• Disabled
• Serial Port 1
• Serial Port 2
Comments
Enable or disable the
onboard LAN2 I/O ROM.
Choose a mode for the
PCI ROM priority. In case
of multiple Option ROMs
(Legacy ROM and EFI
Compatible ROM), the
selection specifies which
PCI Option ROM to launch.
Enable or disable the USB
controller.
Enable or disable the
support on legacy USB
devices.
Enable or disable the
port 60h/64h emulation.
This function is for the
operating system that does
not support legacy USB
devices.
Mass storage device
emulation type. Auto
means to enumerate
devices according to their
media format. Optical
devices are emulated as
"CD-ROM"; drives with
no media are emulated
according to the drive type.
The setting specifies how
the host computer and the
remote computer (which the
user is using) will exchange
data. Both computers
should have the same or
compatible settings.