Configuring The Advanced Sata Or Sas Hardware Raid - Lenovo THINKSERVER 387 Hardware Maintenance Manual

Lenovo server user manual

Table of Contents

virtual drive data might be corrupted. Be sure to back up the data before running a consistency check if you

suspect the data might be corrupted.

To run a consistency check using the LSI Software RAID Configuration Utility program, do the following:

1. Start the LSI Software RAID Configuration Utility program. See "Starting the LSI Software RAID

Configuration Utility program" on page 74.

2. On the main interface of the program, select Check Consistency and follow the instructions on the

screen.

The consistency check rate is the rate at which consistency check operations are run on a system. The

consistency check rate can be configured between 0 percent and 100 percent. At 0 percent, the consistency

check is done only if the system is not doing anything else. At 100 percent, the consistency check has a

higher priority than any other system activity.

To configure the consistency check rate using the LSI Software RAID Configuration Utility program, do

the following:

Note: Using a consistency check rate of 0 or 100 percent is not recommended. The default value is 30

percent.

1. Start the LSI Software RAID Configuration Utility program. See "Starting the LSI Software RAID

Configuration Utility program" on page 74.

2. On the main interface of the program, select Objects ➙ Adapter ➙ Chk Const Rate.

Note: Use up and down arrow keys to navigate between items and press Enter to select an option.

3. Set the consistency check rate by typing a desired value from the keyboard directly.

Installing and using the MegaRAID Storage Manager program

You can install and use the MegaRAID Storage Manager program to manage the RAID array and RAID

controller in an operating system environment after configuring RAID.

The installation package for the MegaRAID Storage Manager program is on the ThinkServer EasyStartup

DVD. After you enter the operating system, insert the ThinkServer EasyStartup DVD into the optical drive.

The installation package for the MegaRAID Storage Manager program is located in the Utilities and Others

folder in the root directory of the DVD.

To install and use the MegaRAID Storage Manager program, refer to the following chapters in the MegaRAID

SAS Software User Guide on the documentation DVD that comes with your server:

Note: Some information in these chapters might be intended for the advanced SATA/SAS hardware RAID

configurations and might not apply to the onboard SATA software configurations.

• "MegaRAID Storage Manager Overview and Installation"

• "MegaRAID Storage Manager Window and Menus"

• "Monitoring System Events and Storage Devices"

• "Maintaining and Managing Storage Configurations"

The MegaRAID SAS Software User Guide is also available on the Lenovo Web site at:

http://www.lenovo.com/ThinkServerUserGuides