Declaration Of Conformity; Fcc Statement - JBL SRX812P User Manual

Safety And EMC Compliance Specifications
Report No.
EN 55103-1:2009 +A1:2012
EN 55103-1:2009 +A1:2012
EN 61000-3-2:2006 +A1:2008 +A2:2009 Limits for Harmonic Current Emissions (equipment input current less than or equal to 16A
EN 61000-3-3:2013
EN 55022:2010
EN 55103-2:2009
EN 61000-4-2:2008 Ed 2.0
EN 61000-4-3:2010 Ed 3.2
EN 61000-4-4:2007
EN 61000-4-5:2006
EN 61000-4-6:2006
EN 61000-4-11:2004
Safety Standard:
EN60065:2002 +A12:2011,
IEC 60065:2001 Ed 7
+A1:2005 +A2:2010
CAN/CSA 60065-03 incl. A1
UL Std No. 60065-2007
UL Compliance Specifications
UL 60065 7th Ed. CAN/CSA 22.2 No.60065_2003

FCC Statement

1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

DEClaraTION Of CONfOrmITy

Description
EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control
Apparatus for Professional Use, Part 1: Emissions
Magnetic Field Emissions – Annex A @ 10cm and 20cm
Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply systems Rated Current less than
or equal to 16A
Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits;
Conducted, Class A
EMC Compatibility – Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control
Apparatus for Professional Use, Part 2: Immunity
Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8k V Air Discharge)
Radiated, Radio-Frequency, EMC Immunity (Environment E2, Criteria A)
Electrical Fast Transient/Burst Immunity (Criteria B)
Surge Immunity (Criteria B)
Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A)
Voltage Dips, Short Interruptions and Voltage Variation
Safety Requirements – Audio, Video, and Similar Electronic Apparatus
Safety Requirements – Audio, Video, and Similar Electronic Apparatus
Safety Requirements – Audio, Video, and Similar Electronic Apparatus
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
IC Warning
1. This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device.
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate
the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
5