Advertisement
E
XAMPLES SECONDARY KEY FUNCTIONS
You want to activate the Piano Mode:
Push
and ON. The 4 program selection keys turn red and the mode key starts blinking. The
MODE
secondary piano key function mode is activated; display shows
Hold down the black key for "Piano Mode" (...) and push the white key for "On" (...), you will hear an
acoustic signal and will see a change on the display.
Exit secondary piano key function mode with the key Mode.
You want to use the knob "Contr." to control the aftertouch sensibility:
Therefore you have to assign the controller number 0.
Push
and ON. The 4 program selection keys turn red and the mode key starts blinking. The
MODE
secondary piano key function mode is activated, display shows
Hold down the black key for "Knob" (d#3) and push the white key for "0" (f2).
If you press a key you will hear an acoustic signal.
After releasing the key "Knob" (d#3) you will hear an acoustic confirmation (ascending melody).
Display shows following with
Exit secondary piano key function mode with the key Mode.
You are now able to use the controller for adjusting the aftertouch sensibility to suit your needs.
To assign a multi-digit number always put in the highest digit first.
For example: To enter controller number 91 (Reverb) first enter "9" (white key a3), following "1"
(white key g2). After releasing the black key you assigned the controller number. The controller will
send the values 0 – 127 with controller number 91 using the MIDI interface.
MK2 Imperial 97: Note Nr. 6 – 14 no aftertouch available.
Note:
You are also able to use the white keys for two digit numbers 10 – 16. e.g. 127 using the white keys
for 12 and 7.
We recommend saving your current settings using "User Store" (B-2) before leaving secondary piano
key function mode.
page 16
. Your input was successful.
Manual MK2 V 1_05
.
Contents
Advertisement
