Advertisement
S
P
ECONDARY
IANO KEY FUNCTIONS
Please read following instructions carefully before using the secondary key functions!
The keys don't generate sound if you switch to secondary piano key function mode. If you press a
key you will change the settings. Therefore make sure you exit secondary piano key function mode
before playing.
But don't worry, to change settings you always have to press more than one key at a time or hold
down keys for several seconds. An acoustic signal as well as the display informs you of impending
changes to the settings.
If you should accidentally get in this situation, don't panic. Read current settings on the display and
double check them. If everything goes wrong you can always reset to factory settings or your
personal setup. (User Store / User Recall)
A
S
CTIVATE
ECONDARY
To activate secondary piano key function mode press
keys
and
turn red and
1 2 3
4
Secondary piano key function mode is now active.
Each valid second key function input is confirmed with a brief acoustic signal.
Black keys (selection keys) select the setting you want to change; white keys (input keys) allow
you to choose the desired parameter of the selection. Pushing down any selection key displays
you the current setting.
pushing the input
key.
Exceptions: Dyn Store, User Store
For more detailed information refer to
The key a1 generates sound even in secondary piano key function mode to allow sound checks.
We highly recommend saving user defined settings before exiting secondary piano key function
mode. If you should, for any reasons change your defined settings, "User Store" enables you to
retrieve your personalised settings.
Go to "User Store" for further instructions on page 11
Exit secondary piano key function mode with the key Mode.
stops flashing, the LED changes to green and the display shows
Mode
R
ESET TO FACTORY SETTINGS
Change to secondary piano key function mode
three seconds, till it flashes red four times and you hear an acoustic signal.
Display toggles till you hear the signal:
All configurations are changed to factory settings (see page
velocity curve settings.
page 10
P
K
F
IANO
EY
UNCTION
starts flashing red. Display shows
Mode
To change it, hold down the selection key while making changes by
Examples secondary key functions
Manual MK2 V 1_05
M
ODE
and
Mode
ON
(Mode
flashes red) and hold the key
Confirmation when finished:
19) including User Store, dynamics and
Contents
simultaneously. The LEDs on
(page 16).
or
Panic Reset
for
Advertisement
