Hook
Be sure to attach the provided ferrite core to the HDMI cable (not supplied) to reduce interference or
electrical noise.
Attach the ferrite core as close as possible to connector on the TV side as shown.
Close the ferrite core until it clicks.
10
Power cord connection
To attach
Insert it firmly until the
tabs on both sides click
into place.
Installing the remote's batteries
Open
Note the correct polarity
(+ or -).
Attaching Ferrite Core
To remove
Caution
Incorrect installation may cause battery
Close
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
Keep pushing both
sides until they snap
and pull.