Accessing System Board Components And Drives; Pivoting The Drive Bay; The Drive - Lenovo ThinkCentre 7098 Hardware Installation Manual

Accessing system board components and drives

To access system board components and the drives:
1. Open the computer cover. See "Opening the cover" on page 12.
2. On some models, you might need to pivot the drive-bay assembly upward and
pivot the hard disk drive upward to access the internal components, see
Figure 6.
Note: Make sure you note the location of any cables that you disconnect from
the drives or the system board.
Attention: You must return the hard disk drive assembly to the latched
position before you close the cover to prevent damage to the hard disk drive
assembly.
Figure 6. Pivoting the drive bay
Chapter 3. Installing options and replacing hardware
13