Table of Contents
Advertisement
Specifications
Item
Display System
Display device
Projection lens
Projection image size
Light source
Accepted digital signals
Audio
Inputs/Outputs
(Video/Audio/
Control)
Operating temperature (Operating
humidity)
Storage temperature (Storage humidity) –20°C to +60°C (–4°F to +140°F) (10% to 90% (no
Power requirements
Power consumption
Standby mode
power consumption
Dimensions (W×H×D)
Mass
Supplied accessories
Optional accessories
Notes
• The values for mass and dimensions are approximate.
• Not all optional accessories are available in all countries and area. Please check with your local
Sony Authorized Dealer.
• Information on accessories in this manual is current as of May 2014.
Design and specifications of this unit and its optional accessories are subject to change without
notice.
60
Specifications
Description
Projection system
SXRD 0.74-inch (18.8 mm) × 3
Number of pixels 4096 × 2160 × 3 pixels
Zoom
Powered (Approx. ×1.6)
Focus
Powered
Corner correction
Powered
adjustment
66-inch to 147-inch (1,676 mm to 3,734 mm)
Laser diode
See "Preset Signals" (page 61).
40 W + 40 W (at 8 Ω )
Power output
Supported format LPCM 2CH (up to 48 kHz)
HDMI Inputs
4
Speaker terminals 2
REMOTE
RS-232C, D-sub 9-pin
LAN
RJ45, 10BASE-T/100BASE-TX
IR IN
Mini Jack
USB
Type A, DC 5 V, Max. 500 mA
5°C to 35°C (41°F to 95°F) (35% to 85% (no
condensation))
condensation))
AC 100 V to 240 V, 50/60 Hz
520 W
0.5 W
1,100 mm × 265 mm × 535 mm (43.3 inches × 10.4
inches × 21.1 inches)
Approx. 51.5 kg (113 lb 8.6 oz)
See "Checking the Supplied Accessories" (page 13).
Active 3D Glasses: TDG-BT500A
Advertisement
Table of Contents
