Table of Contents
Advertisement
Installation Menu
The Installation menu is used for changing the installation settings.
Setting items
V Keystone
Lens Control
Illumination
Blanking
Description
Corrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top (
a lower value (– direction).
When the top of the trapezoid is longer than the bottom (
Sets a higher value (+ direction).
Note
Depending on the picture position adjusted with the CORNER
CORRECTION feature, the aspect ratio of the picture may change from
the original or picture distortion may occur with V Keystone adjustment.
Avoids any operation of the lens such as "Lens Zoom," "Lens Focus,"
and "Lens Corner Correction," by mistake.
On: Enables adjustment of the lens.
Off: Prevents any adjustment of the lens.
Changes the brightness of the LED indicator.
High: The LED indicator lights brightly.
Low: The LED indicator lights not so brightly.
Off: The LED indicator does not light normally.
This feature allows you to adjust the displayable region within the four
directions of the projection surface.
Select the edge to adjust by highlighting Left, Right, Top, or Bottom
using the M/m buttons.
Adjust the amount of blanking using the </, buttons.
Tip
Depending on the aspect ratio setting, right/left blanking may not be
available.
): Sets
):
45
Installation Menu
Advertisement
Table of Contents
