Table of Contents
Advertisement
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1
Enter the phone number that you want associated with a touch tone.
2
Enter the touch tone character where needed (p, w, or
3
Enter the touch tone string.
4
Store the number as you normally would.
SEND A TOUCH TONE STRING
1
Press Menu 4-3-2-1 (Settings > Phone settings > Touch tones > Manual
touch tones).
2
Make sure that the setting is not set to Off.
If not set to Off., scroll to one of the other options and press Select.
3
During your call, press Options, scroll to Touch tones, and press Select.
4
Enter the touch tone string or recall the string from the contact list, then
press OK.
If you send touch tones while in the analog mode, be careful not to send
confidential information.
• LINK CONTACT LIST ENTRIES
This feature allows you to store a phone number in one contact list location and link
it to another contact list entry.
For example, linking the phone number of an automated service (for example,
automated banking service) with a touch tone string entry in your contact list
(example: account and PIN numbers) automatically recalls and sends the touch
tone string when you call the service.
USE LINKING OPTIONS
1
Store the touch tone string into your contact list.
2
Assign the contact list entry with the touch tones to a one-touch dialing location
(example: location 3).
For more information on 1-touch dialing, see "Use 1-touch dialing" on page 59.
3
Edit the automated service's phone number by adding +n to the end of the
phone number (where n is the 1-touch dialing location).
Example: 214-555-1234+3
4
Press OK to save your changes.
5
Dial the automated service number from your contact list.
Your phone automatically sends the touch tones when the call connects.
Downloaded from
www.Manualslib.com
manuals search engine
62
*
).
Copyright © 2003 Nokia
Advertisement
Table of Contents
