Replacing The Cover And Connecting The Cables - Lenovo 3000 J Series User Manual

Replacing the cover and connecting the cables

After working with options, you need to install any removed parts, replace the
cover, and reconnect any cables, including telephone lines and power cords. Also,
depending on the option that is installed, you might need to confirm the updated
information in the Setup Utility program.
To replace the cover and connect cables to your computer:
1. Ensure that all components have been reassembled correctly and that no tools
2. Clear any cables that might impede the replacement of the cover.
3. Position the cover on the chassis so that the guides on the top and bottom of
4. Reconnect the external cables and power cords to the computer. See "Installing
5. To update the configuration, see Chapter 5, "Using the Setup Utility," on page
or loose screws are left inside your computer.
the cover engage the chassis and push the cover to the closed position. Insert
the screws that secure the cover.
external options" on page 16.
47.
Chapter 3. Installing options
37