G-Lab True Bypass Wah-Pad User Manual page 7

Switching on and off the power supply
Switching on the power supply is
done by plugging in the guitar cable
connector into the IN TBWP input and
switching off the power supply is done by
unplugging this connector.
It should be used mono Jack connector
to plug into IN input.
Power supply
To supply the TBWP should be used internal 9V battery or regulated 9V DC
external power supply adapter. Make sure that the connector of the external power
supply adapter has got the proper polarisation.
REMARK: Damage of the TBWP caused by improper power supply causes the loss
of the warranty.
5