Reprinting After A Paper Jam (For Windows Only); Print Quality Help - Epson l550 User Manual

User's Guide
❏ You are using high-quality paper.
❏ The printable side of the paper is face up in the rear paper feed.
❏ The paper stack was fanned before loading.
❏ For plain paper, do not load paper above the line just under the H arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
"Selecting Paper" on page 17
&
❏ The edge guides are snug against the edges of the paper.
❏ The product is on a flat, stable surface that extends beyond the base in all directions. The product will not operate
properly if it is tilted.

Reprinting after a paper jam (for Windows only)

After you cancel the print job because of a paper jam, you can reprint it without reprinting pages that have already been
printed.
A
Solve the paper jam.
"Paper Jams" on page 103
&
B
Access the printer settings.
"Accessing the printer driver for Windows" on page 27
&
C
Select the Print Preview check box in the Main window of your printer driver.
D
Make the settings that you want to use to print.
E
Click OK to close the printer settings window, and then print your file. Print Preview window opens.
F
Select a page that has already been printed in the page list box on the left side, and then select Remove Page from
the Print Options menu. Repeat this step for all the pages that have already been printed.
G
Click Print on the Print Preview window.

Print Quality Help

If you are having print quality problems, then compare it with the illustrations below. Click the caption under the
illustration that best resembles your prints.
Troubleshooting for Printing/Copying
107