Olympus TG-4 Instruction Manual page 63

For the operation method, refer to (P. 42).
To adjust the tap control
1 Select [Calibrate] in Submenu 3 and press the
A button.
2 Select the part to adjust with FG (arrow pad) and
press the A button.
3 Select the [Str] setting with FG (arrow pad) and
press I.
4 Select the [Intvl] setting with FG (arrow pad) and
press the A button.
• Check the operation of the camera by tapping on the camera after making the
settings.
Using the LED illuminator as an auxiliary light (LED Illuminator)
Submenu 1 Submenu 2 Submenu 3
Tough LED
Settings Illuminator
To use the LED illuminator
Press and hold the INFO button down until the
LED illuminator lights up.
• If you perform an operation when the LED
illuminator is on, it will illuminate up to approx.
90 seconds. (Up to 30 seconds when the
camera's power is turned off.)
To turn the LED illuminator off
Press and hold the INFO button down until the LED illuminator turns off.
Off Disables the LED illuminator.
On Enables the LED illuminator.
Top
Str
Avg
Norm
Application
LED illuminator
MENU
Back
Intvl
EN 63 63
EN