Olympus TG-4 Instruction Manual page 28

Taking pictures with [Manual]
1 Use FGHI (arrow pad) to
specify at which edge the next
picture is to be connected, and then
press the A button.
2 Press the shutter button to take
the first frame.The edge of the first
frame is displayed faintly on the
screen.
3 Compose the next shot so that the edge of the first frame displayed faintly on
the screen overlaps the subject of the second frame, and press the shutter
button.
• To combine only two frames, press the A button.
4 Repeat step 3 to take a third frame. The camera automatically combines the
frames into a single panorama image.
Taking pictures with [PC]
1 Use FGHI (arrow pad) to specify at which edge the next picture is to be
connected, and then press the A button.
2 Press the shutter button to take the first frame. The edge of the first frame is
displayed faintly on the screen.
3 Compose the next shot so that the edge of the first frame displayed faintly on
the screen overlaps the subject of the second frame, and press the shutter
button.
4 Repeat step 3 until the desired number of frames are taken, and then press
the A button or  button when finished.
• Panorama shooting is possible for up to 10 frames.
• The shot images are combined into a single panorama image by the PC
software.
• For details on installing the PC software, refer to P. 85. In addition, refer to the
PC software help guide for details on how to make panorama images.
28 EN
Direction for combining frames
SCN SCN
s
MANUAL MANUAL