Olympus TG-4 Instruction Manual page 30

Using shooting options (Set by direct button)
Frequently used functions are assigned to IFG (arrow pad). Just by pressing
the button, you can select the assigned function directly.
Some items are not available in some shooting modes. g "List of settings
available in each shooting mode" (P. 103)
Flash
You can use a flash when shooting.
1
Press the # button to display options.
2
Use HI (arrow pad) to choose a flash mode and press A.
AUTO Auto flash
#
!
#
$
# RC
# SLV
# SLOW
q
• In [!] (Red-eye reduction flash), after the pre-flashes, it takes about
1 second before the shutter is released. Do not move the camera until
shooting is complete.
• [!] (Red-eye reduction flash) may not work effectively under some
shooting conditions.
30 EN
Red-eye
reduction flash
Fill-in flash
Flash off
Remote Control
Slave
Slow
synchronization
LED On
The flash fires automatically in low light or
backlight conditions.
This function allows you to reduce the red-
eye phenomenon.
The flash fires regardless of the light
conditions.
The flash does not fire.
The dedicated underwater strobe or the
Olympus wireless RC flash is used to take
pictures. For details, see "Taking pictures
with the Olympus Wireless RC Flash
System" (P. 98).
The commercially-available slave flash that
is synchronized with the camera flash is
used for taking pictures. The flash intensity
setting can be adjusted.
Slow shutter speeds are used to brighten
dimly-lit backgrounds.
Available only in k (Microscope).
The LED turns on when a picture is taken.
This is effective for taking close up pictures.