Advertisement
Lights
Power
The Power light shines
red
when power is first plugged in. Flashes
blue
when connection is being set up. This
light should be
solid blue
when the power is on and the device is ready. It will light up when the router is
powered on, and will flash blue as it is booting up, or for a system self-test or firmware upgrade. If the power
light is
red,
this would indicate a
malfunction.
Ethernet
This light should display a
solid blue
when an Internet connection is established. If it is off, then this would
indicate no connection on Ethernet. It will
flash green
when data is being
transmitted.
Phone 1
The phone light should be
GREEN
when the ATA is registered and provisioned. It will blink when a connected
phone is being used or an incoming call has been detected. When the phone is not in use the Phone LED will
be solid as long as the ATA is registered. If the Phone LED is not lit, then the ATA has no registration.
Advertisement
