Lenovo THINKPAD W701DS Hardware Maintenance Manual page 197

Table 58. Removal steps of wireless LAN antenna assembly and UWB antenna (continued)
When installing: As you route the cables, make sure that they are not subjected
to any tension. Tension could cause the cables to be damaged by the cable
guides, or a wire to be broken. When attaching the antenna cable, route the cable
as shown in this figure:
a
Wireless USB antenna (only for W700 and W700ds)
b
Wireless LAN antenna assembly
Note: Some models do not have the Wireless USB antenna a .
a
v For models with a damaged wireless USB antenna installed, remove the
damage antenna and should NOT replace it.
v For models with a non-damaged wireless USB antenna installed, leave it
installed in the computer.
b b
Removing and replacing a FRU
189