Lenovo THINKPAD W701DS Hardware Maintenance Manual page 169

Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
When you replace the base cover, you need to apply the following labels:
7
Product label
6
Homologation label
Following labels need to be peeled off from the old base cover, and need to be
put on the new base cover.
1
Serial number label
2
Wireless LAN LMA label
3
Windows license label (COA)
4
Wireless LAN label
5
Ether label
For some models, you also need to apply one or two FCC labels. Check the old
base cover; if it has one or two FCC labels, find duplicates of them in the label
kit and apply them to the new base cover.
For the location of each label, refer the following figure:
For ThinkPad W700 and W700ds:
7
6
5
1
4
2
3
Removing and replacing a FRU
161