Table 12. Removal steps of HDD cover, HDD and HDD rubber rails or SSD and storage
converter (continued)
92
ThinkPad W700, W700ds, W701, and W701ds Hardware Maintenance Manual
Note: Mounted number of the hard disk drive depends on the models. In
models with RAID features, two hard disk drives that have same FRU no. must
be used in slot 0 ( a ) and in slot 1 ( b ).
When installing: Make sure that the HDD connector or SSD connector is
attached firmly.
HDD and HDD rubber rails:
When installing: The rubber rails on the hard disk drive must be attached to
the replacement drive. Otherwise the drive cannot be installed properly.
a
b
5
2
4
3
5