Maintenance; After Use - Makita CL104D Instruction Manual

Corner nozzle
1
014728
Fit on the corner nozzle for cleaning corners and
crevices of a car or furniture.
Corner nozzle +Extension wand (Straight pipe)
014729
In tight quarters where the cleaner itself cannot squeeze
in, or in high places hard to reach, use this arrangement.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off before
•
attempting to perform inspection or maintenance.

After use

014738
When storing the cleaner, hang it from a nail using the
hand strap.
014740
1. Corner nozzle
1. Corner nozzle
2. Extension wand
2
1
NOTE:
Putting the cleaner against the wall without any
•
other support cause the cleaner to fall down and
be damaged.
Cleaning
014739
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the like.
•
Discoloration, deformation or cracks may result.
008934
Wash the dust bag in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufficiently dried bag may cause
poor suction and shorten the service life of the motor.
NOTE:
Dust pack is a throw-away type.
•
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
Removing and installing the sponge filter
1
014741
To remove the sponge filter, remove the dust bag or
dust pack and then pinch and take it out.
8
1. Sponge filter