Section 3 Disassembly Instructions - Icom IC-F50 Service Manual

SECTION 3
•
REMOVING THE CHASSIS UNIT
1 Unscrew 1 nut A, and remove 1 knob B.
2 Remove 1 washer c, and unscrew 1 screw D.
3 Unscrew 2 screws E, and remove 2 washers F.
4 Unscrew 2 screws G.
5 Take off the chassis unit in the direction of the arrow.
6 Remove the cable H from the chassis unit.
C D
B
A
F
E
•
REMOVING THE MAIN UNIT
1 Unscrew 2 screws I.
2 Unsolder 5 points J, and remove the shield cover.
3 Unscrew 5 screws K.
4 Unsolder 5 points L, and take off the main unit in the
direction of the arrow.
K
L
L
Main unit
Chassis unit
DISASSEMBLY INSTRUCTIONS
Chassis unit
G
F
E
H
I
J
Shield cover
I
K
J
•
REMOVING THE FRONT UNIT
1 Unscrew 4 screws M.
2 Unsolder 11 points N.
3 Unplug the connector O from J402 on the Front unit.
4 Take off the front unit in the direction of the arrow.
N
N
O
3 - 1
M
Front unit