Rear Panel - Sony MVE-8000A-C Operation Manual

Rear Panel

This figure shows the rear panel when one MKE-8020A is installed in the unit.
REF IN
9REF IN connectors
This figure shows the rear panel when one MKE-8021A is installed in the unit.
V1 K1 V2
REF IN
9REF IN connectors
a SWITCHER (switcher I/O) A and B connectors
(MDR 68-pin) (MKE-8020A)
Connect with the supplied special cable to the DME 1A
and 1B connectors of the MVS-8000/8000A Multi Format
Switcher Processor.
Each connector handles two channels of video signal input
and output. Therefore, when this unit is configured for one
or two channels (with one MKE-8040A board installed),
you do not need to connect the SWITCHER B connector.
If you are connecting a second MVE-8000A Multi Format
DME Processor to the MVS-8000/8000A, connect the
8
Location and Function of Parts
1SWITCHER A and B connectors
SWITCHER B
REMOTE4 REMOTE3
REMOTE2 REMOTE1
DATA CTRL
6REMOTE 1 to 4 connectors
7CTRL connector
8DATA connector
1V, K IN/OUT connectors
1 2 3 4
MONI OUT
K2 V3 K3 V4 K4 V1 K1 V2 K2
IN OUT
REMOTE4 REMOTE3
REMOTE2 REMOTE1
DATA CTRL
4GPI and GPI2 connectors
6REMOTE 1 to 4 connectors
7CTRL connector
8DATA connector
SWITCHER A
-
AC IN A
U
-
GPI 2 AC IN B
GPI
4GPI and GPI2
connectors
3U terminal
5MONI OUT connectors
V3 K3 V4 K4
-
AC IN A
U
-
AC IN B
GPI 2
GPI
3U terminal
SWITCHER A and B connectors on the second processor
to the DME 2A and DME 2B connectors on the MVS-
8000/8000A.
a V, K IN/OUT (video and key input and output)
connectors (BNC type) (MKE-8021A)
Used for SDI interface input and output of video signals
between this unit and the switcher or external video
devices.
2- AC IN A and B connectors
2- AC IN A and B connectors