Kicker SoundStages PWRA211 Manual page 2

CONTENTS CON'T
POWER HARNESS
200W AMP/BRACKET ASSEMBLY
OVERLAY HARNESS
M6 BOLT x2
15A FUSE
1 . Disconnect negative battery cable
WIRE TIES x6
2. Remove the rubber liner in the pocket above the radio to access the 7mm screw and remove the
screw. Fig. 1
3. Remove the pocket, or window switch depending on trim level, below the radio by prying loose with
a panel removal tool. Find the screw and remove. Fig. 2
4 . Gently pull out on the panel just below the steering column, rotate down and remove. Fig. 3
5. Remove the two 7mm screws (one on each side of the steering column) that secure the
radio/instrument bezel. Fig. 4
PWRA211 · ©2012 Stillwater Designs
2-22-12 Page 2 of 9