Using Service Jig; Self-Diagnosis Function - Sony HDR-FX7 Service Manual

1-4. USING SERVICE JIG

Connect the CPC-7 jig connector (J-6082-382-A) to the CN1014 on the TT-003 board.

1-5. SELF-DIAGNOSIS FUNCTION

1-5-1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or LCD
screen what to do.
Details of the self-diagnosis functions are provided in the Instruction
manual.
Viewfinder or LCD screen
C : 3 1 : 1 1
Repaired by:
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service
engineer
HDR-FX7/FX7E_L2
TT-003 BOARD
(SIDE B)
Blinks at 3.2Hz
C 3 1 1 1
Block
Indicates the appropriate
step to be taken.
E.g.
31 ....Reload the tape.
32 ....Turn on power again.
16
1
1-5-2. Self-diagnosis Display
When problems occur while the unit is operating, the counter of the
viewfinder or LCD screen shows a 4-digit display consisting of an
alphabet and numbers, which blinks at 3.2 Hz. This 5-character
display indicates the "repaired by:", "block" in which the problem
occurred, and "detailed code" of the problem.
Detailed Code
Refer to "1-5-3. Self-diagnosis Code Table".
1-2
ENGLISH JAPANESE
ENGLISH JAPANESE
CPC-7
(J-6082-382-A)