Diagnostics Mode; Entering Diagnostics Mode; Available Tests - Lexmark E350d Service Manual

Diagnostics mode

Entering Diagnostics Mode

1.
Turn off the printer.
2.
Press and hold Go
3.
Turn on the printer.
4.
Release the buttons when Performing Self Test displays.

Available tests

The tests display on the operator panel in the order shown:
Diagnostics mode tests
REGISTRATION
Margins
(top margin, bottom margin, left margin)
Quick Test
Printhead
PRINT TESTS
Tray 1
Tray 2 (if installed)
Prt Quality Pgs
HARDWARE TESTS
LCD Test
Button Test
DRAM Test
DUPLEX TESTS
Quick Test
Top margin
Left Margin
Sensor Test
Duplex Feed 1
INPUT TRAY TESTS
Feed Tests
Sensor Test
BASE SENSOR TEST
Front Door
Input
Output
PRINTER SETUP
Defaults
Page Count
Perm Page Count
Serial Number
and Back .
See "Margins" on page
See "Quick Test" on page
See "Printer (printhead) alignment settings" on page
See "Input source tests" on page
See "Input source tests" on page
See "Print quality pages (Prt Quality Pgs)" on page
See "LCD Test" on page
See "Button Test" on page
See "DRAM Test" on page
See "Quick Test" on page
See "Top Margin" on page
See "Left Margin" on page
See "Sensor Test" on page
See "Duplex Feed 1" on page
See "Feed Tests (input tray)" on page
See "Sensor Test (input tray)" on page
See "Front Door (front access door sensor)" on page
See "Input (input sensor)" on page
See "Output (exit sensor)" on page
See "Defaults" on page
See "Page Count" on page
See "Perm Page Count (permanent page count)" on page
See "Serial Number" on page
3-7.
3-12.
3-12.
3-12.
3-13.
3-13.
3-13.
3-14.
3-14.
3-14.
3-14.
3-15.
3-15.
3-16.
3-16.
3-16.
3-17.
3-17.
3-18.
Diagnostic aids
4512-420, -430
3-8.
3-12.
3-16.
3-17.
3-5