Position Send Received; Position Request Received - M-tech MT-500 Owner's Handbook Manual

Position Send Received

When you receive the position send from another vessel, an alert sounds and
RECEIVED POSITION appears in the display.
If the calling vessel is listed in your DSC calling directory, the vessel name, as
it is listed, appears in the display. If the caller is not listed in your directory,
the caller's MMSID appears in the display.
• Push the SELECT/ENT knob to see the received Lat/Lon position.

Position Request Received

If the calling vessel is listed in your DSC calling directory, the vessel name, as
it is listed, appears in the display. If the caller is not listed in your directory,
the caller's MMSID appears in the display.
Also the following screen alternates with the Call Received screen.
• Press the
CALL
return to the Normal Communication screen.
• To silence the alert without replying, press the
interrupted and the Normal Communication screen appears in the dis-
play.
• To silence the alert and reply later, push the SELECT/ENT knob. The
Reply screen continues to alternate with the Call Received screen in the
display.
9:2 a
name or ID
RECEIVED
22 POSITION
Position Received
0:45
P
name or ID
RECEIVED
23 REQ POS
Position Request Received
0:45a
name or ID
PRESS CALL
23 TO REPLY
Position Request Reply Screen
key to reply to the call. Then, press the
+
INT
INT
INT
key to
END
key. The call is
END
MT-500 51