Priority Scan; All Scan - M-tech MT-500 Owner's Handbook Manual

Priority Scan

The Priority Scan function scans the Primary Calling Channel and the last
selected working channel.
To select Priority Scan:
• Press the
SCAN
the two scanned channel numbers appear alternately in the display.
SCAN HI
08Dec12:05
N 28 04.814
W 83 42.169
To exit Priority Scan:
• Press the
SCAN

All Scan

The All Scan function scans all channels except channel 70. Channel 70 is
the Digital Selective Calling (DSC) channel. Voice traffic is not permitted on
this channel. If noisy or busy channels interfere with scanning, the interfer-
ing channels may be temporarily removed from the scan sequence.
To select All Scan:
• Press and hold the
upper line of the display. The scanned channel numbers appear in se-
quence in the channel number display.
To Exit All Scan:
• Press the
SCAN
To delete channels from the scan sequence:
• Push and hold the SELECT/ENT knob while the scan is halted on the
offending channel. Turning the transceiver Off and On, restores all chan-
nels to the scan sequence.
key. PSCAN appears in the upper line of the display and
INT
Priority Scan Sequence
key or press the
key for 2 seconds. ALLSCAN appears in the
SCAN
key or press the
SCAN HI
08Dec12:05
N 28 04.814
W 83 42.169
key.
16
key.
16
MT-500
INT
19