Memory Scan - M-tech MT-500 Owner's Handbook Manual

Memory Scan

Memory Scan allows the user to create and scan a bank of preferred channels.
Channels may be added to or removed from the memory channel bank as
desired. Memory channels are stored individually and may be deleted indi-
vidually, or the entire bank may be deleted. If the PTT button is pressed, the
transceiver exits scanning and normal communication is resumed.
To create or add channels to the memory channel bank:
• Press the
MEM
two lines of the display. If no channels have been previously added to the
bank, the Primary Calling Channel (16) is displayed. Otherwise, up to six
channel numbers appear. A plus sign (+) at the end of the lower line
indicates more than six channels are stored in the bank. Press the
key again to advance to the next page of channels. The memory channel
bank can hold all usable voice communication channels.
DD/DELETE
MEM CH NNEL
16
Memory Scan Bank Memory Scan Bank
Default Page
• Rotate the SELECT knob or microphone keys to select a desired channel
to add to the memory channel bank.
• Press and hold the
nel is stored and the channel number appears in the memory channel
bank. Repeat the select and store process to add more preferred channels.
As each channel is added, the existing channels in the bank shift as nec-
essary to display the new channel number in the bank.
When in the normal communication mode, as channels are selected, MEM
CHANNEL appears in the second line of the display if the selected chan-
nel is stored as a memory channel.
To remove channels from the memory channel bank:
20 MT-500
key. The Memory Scan channel bank appears in lower
DD/DELETE
INT
MEM CH NNEL
06 09 16
22 67 68 +
Page Full
key for about two seconds. The selected chan-
MEM
6 PRI. HI
MEM CHANNEL
N 28 04.8 4
W 83 42. 69
Memory Channel Display
DD/DELETE
INT
MEM CH NNEL
72 78
Memory Scan Bank
Next Page
INT
MEM
INT