5.3 Basic Operation
Power On/Off
Power to the transceiver is controlled with the VOLume knob. When the VOL
knob is in the full CCW position the unit is turned Off.
To turn the transceiver On:
•
Rotate the VOL knob CW until it clicks over the detent. The LCD back-
light illuminates and the Power-On screen appears.
After approximately two seconds, the Normal Communication screen ap-
pears in the display.
6 PRI. HI
MEM CHANNEL
N 28 04.8 4
W 83 42. 69
Normal Com Screen
with GPS Connected
To turn the transceiver Off:
•
Rotate the VOL knob CCW until it clicks over the detent to the OFF posi-
tion.
Volume and Squelch
The VOLume and SQuelch controls have each knob. They are independent
controls but work together to control audio output from the speaker. The
volume control sets the loudness of sound from the speaker and the squelch
control is used to mute background noise when no received signals are present.
14
MT-500
MT-500
CODE 000.00
Power-On Screen
INT
INT
6 PRI. HI
MEM CHANNEL
99 99.999
999 99.999
Normal Com Screen
w/o GPS connected
INT