Mnp/V.42/V.42Bis/V.44 Commands - Lenovo 7390 User Manual

MNP/V.42/V.42bis/V.44 commands

62
User Guide
Command
&V1
&W_ &W0
&W1
%E_ %E0
%E1
+MS?
+MS=?
+MS=a,b,c,e,f
Command
%C_ %C0
%C1
%C2
%C3
&Q_ &Q0
&Q5
&Q6
+DS44=0, 0
+DS44=3, 0
+DS44?
+DS44=?
Function
Display Last Connection Statistics
Stores the active profile as Profile 0
Stores the active profile as Profile 1
Disable auto-retrain
Enable auto-retrain
Displays the current Select Modulation
settings
Displays a list of supported Select Modulation
options
Select modulation where: a=0, 1, 2, 3, 9, 10, 11,
12, 56, 64, 69; b=0-1; c=300-56000; d=300-
56000; e=0-1; and f=0-1. A, b, c, d, e, f
default=12, 1, 300, 56000, 0, 0. Parameter "a"
specifies the modulation protocol desired
where: 0=V.21, 1=V.22, 2=V.22bis, 3=V.23,
9=V.32, 10=V.32bis, 11=V.34,
12=V.90,K56Flex,V.34......,56=K 56Flex,
V.90,V.34......, 64=Bell 103, and 69=Bell 212.
Parameter "b" specifies automode operations
where: 0=automode disabled, 1= automode
enabled with V.8/V.32 Annex A. Parameter
"c" specifies the minimum connection data
rate (300- 56000). Parameter "d" specifies the
maximum connection rate (300-56000);
Parameter "e" specifies the codec type (0=
Law, and 1=A-Law). Parameter "f" specifies
"robbed bit" signaling detection (0=detection
disabled 1=detection enabled)
Function
Disable MNP Class 5 and V.42bis data compression
Enable MNP Class 5 data compression only
Enable V.42bis data compression only
Enable MNP Class 5 and V.42bis data compression
Direct data link only (same as \N1)
V.42 data link with fallback options
Normal data link only (same as \N0)
Disable V.44
Enable V.44
Current values
List of support values