Accessing The Preset Stations; Preset Scan(Vr 200, Vr 300 And Vr 400) - Volvo VR100 Operating Instructions Manual

Presets 37

Accessing the Preset Stations

Press MODE until desired band is displayed
(AM, FM or WX)
Turn SELECT to choose preset station.
Note: If currently tuned to the desired band,
you only need to turn the SELECT knob.
Preset Scan
(VR 200, VR 300 and VR 400)
The preset stations can be scanned through in
each of the bands. To Scan through presets;
Press RND/SCN to display PSCN and begin
scanning presets.
While scanning, the radio pauses for
approximately 5 seconds on each preset. To
stop the scan;
Press RND/SCN again.
The scan continues until it is stopped.
Note: When scanning through presets, the
radio will only stop on presets where the
station strength is strong enough.