Table of Contents
Advertisement
Line No.
Specification
1. 2
Keypod
3. 4
MIC-,MIC+
5
TX
6
RX
7
GND
8
MOTOR
9
ACC
10
V-
11
V+
Notes of the relay wiring
The relay wiring of pump: oil connectors of both ends are a fine white line (85)
and a fine yellow line (86). The fine white line (85) is connected to vehicle
positive power (+12V). The fine yellow line is connected to the device relay
control line.
Cut off the positive connection line of the pump; then connect in series to the
relay N.C. contact (thick green line 87a) and the other end to relay COM
contact (thick green line 30).
Note: The standard relay is 12V and only suits the 12V car battery. Please
choose 24V relay if it is 24V car battery.
Color
Orange/ orange
Grey/Brown
Green
Blue
Purple
Yellow
Orange
Black
Red
Instruction
Connect to SOS button
Connect to Microphone
Sending data (TX)/backup
Receiving data (RX)/backup
Ground wire
Connect to relay control line
Connect to ACC ignition
Vehicle 12V/24V negative storage battery
Vehicle 12V/24V positive storage battery
Advertisement
Table of Contents
