Table of Contents
Advertisement
tracker can only indicate to cut off oil when GPS is in valid position status, and
the speed is less than 20KM/H or in static. It needs password and platform
account password is needed when sending oil cut off command.
7.8.2. Via SMS
Firstly, you should set a center number. Only center number can send the
command to the device to cut off and restore oil.
The format is:
RELAY,1#
After the command is carried out, it will reply "Cut off the fuel supply: Success!
Speed:0 Km/h". If the command didn't carry out, it will reply the reason about
fail to carry out.
Note: To ensure the safety of the driver and the car, this command is valid
only under two conditions: the GPS is located; the speed is less than 20km/h.
7.9 Restoring Oil
7.9.1. Via platform7.9.1.
When the alarm is off, sending recover oil commands manually. Device will
restore oil supplying, and vehicle will work normally again.
Platform account password is needed when sending oil cut off command.
7.9.2. Via SMS7.9.2.
Only center number can send the command to the device to restore oil.
The format is
RELAY,0#
:
After the command is carried out, it will receive "Restore fuel supply:Success!"
7.10 Over speed Alarm7.10
When the car is moving over a limited speed in average in a limited time period,
then the device will send over speed alarm SMS to user.
To turn on the over speed function, please send below SMS command:
SPEED,Time,Limited speed#
Time range（Minute）: 1-10
Limited speed range（km/h）: 0-255 (0 refers to turn off over speed alarm
function)
Example: SPEED,3,120#
Means when the car is moving over 120km/h in average in 3 minutes, the
device will send over speed alarm to user.
Web8．Web based tracking online activation
The GPRS web based tracking platform allows real time tracking with the
latest Google maps. There is also a playback feature that allows you to view
Advertisement
Table of Contents
