Red Led (Power/Working Status); Interface Introduction - Waitrack GPS Vehicle tracker User Manual

battery)
● Compatible with external connection through (serial port)
●Geo-fence via sms command

2.1 Red LED (power/working status)

LED Status
Flashing (interval 0.1s)
Continuously in bright state
Slow flashing(interval 0.2s)
Continuously in dark state
Slow flashing(flash 0.1s after every 2s)
2.2 Green LED(GSM status indicator)
LED Status
Quick flashing (interval 0.1s)
Slow flashing(flash 0.1s after every 2s)
Continuously in bright state
Continuously in dark state
2.3 Blue LED GPS status indicatorLED（
GPSindicator）
LED Status
Flashing (interval 0.1s)
Continuously in bright state
Continuously in dark state
2.4 Ignition detection indication
Three (blue/red/green) LEDs are in cycling flashing

3. Interface introduction

Meaning
Low battery indication
Charging
Full charge
Low battery / power off
Working normally
Meaning
GSM initialization
Receive GSM signal normally
GSM conversation/Start GPRS
No GSM signal
Meaning
Searching GPS signal
GPS located
GPS not located