MSR HUBBA HUBBA NX Assembly Instructions page 2

Fast & Light Setup with Rainfly
®
and MSR Footprint (sold separately).
®
Hubba Hubba Footprint-Rainfly Setup
PR EPAR E F O R S E T U P, AT TA C H PO L E S
Step-2
1. Start by staking out the
footprint with the MSR
logo facing up.
2. Insert assembled poles
into the footprint's
corner grommets to
create the same pole
structure as the
standard setup.
SEC UR E R AI NF LY
Hubba Hubba Footprint-Rainfly Setup
Step-3
1. Secure rainfly by attaching the
rainfly webbing to the pole
tips using the grommets.
2. Insert ridge pole into
grommets above vestibule
doors on rainfly.
Hubba Hubba Footprint-Rainfly Setup
SEC UR E T E NT
Step-4
1. Stake out the tent's vestibules
and guy out if necessary.
HU BB A H UB BA
Fast & Light
M S
O U N T A I N A F E T Y
™
Setup with Rainfly only.
®
PR E PAR E F OR S E T UP
Hubba Rainfly Only Setup
Step-1
1. Assemble poles
2. Lay rainfly on the ground.
AT TAC H PO L E S
Hubba Hubba Rainfly Only Setup
Step-2
1. Insert tips of poles into grommets
at bottom of rainfly on one side.
2. Place the other end of the poles
into grommets at other side
of rainfly, making sure
frame fits properly
under the rainfly.
3. Insert ridge pole
into grommets
above vestibule
doors on rainfly.
Hubba Hubba Rainfly Only Setup
S E C UR E T EN T
Step-3
1. Stake out the corners and tension
the webbing straps.
2. Stake out the vestibules and guy
out if necessary
R
E S E A R C H
®
NX