Table of Contents
Advertisement
Available languages
Available languages
A
ssembly
your big green complete is easy to assemble
and requires no tools:
1. attach hose to Quick Release™ hose
door by inserting fitted end and turning
clockwise until you hear it click into the
locked position.
2. attach hose solution line to unit by inserting
fitted end into the machine. turn clockwise
until it snaps into place.
3. snap the two wand pieces together by
lining up tabs with holes and clicking
together. be sure that the wand piece
with the adaptor (see figure 4) is the
one you will attach the tool to. attach
assembled wand to grip using the same
technique.
4. snap the desired tool on the end of
the wand.
5. Place wand adaptor into the wand
caddy on the side of the unit.
6. Place either tool caddy or solution tank
(if wet clean mode is desired) onto the
back of the machine.
6
w w w . b i s s e l l . c o m
WARNING:
do not plug in your cleaner
until you have completely
assembled it per the above
instructions and are familiar
with all instructions and
operating procedures.
1
3
5
Wand caddy
Wand adaptor
2
4
6
8 0 0 . 2 3 7 . 7 6 9 1
Advertisement
Table of Contents
