Changing Print Settings - Epson Stylus Photo RX620 series Basic Operation Manual

Changing Print Settings

1
Menu Item Setting Item
Paper Type Plain,
Prem.Glossy*,
GlossyPhoto,
SemiGloss,
Matte, PQIJ,
Photo Paper,
Bright White,
Iron On,
PhotoStickers
A4, 10 × 15 cm (4
Paper Size
× 6 in)*, A6
Layout Borderless*
With Border
Upper1/2
2-up
8-up
Stickers 16
[P.I.F.]
Quality Normal, Photo*,
Best Photo
Filter Off*
Sepia
18
Printing Directly from a Memory Card
2
Cancel
Description
Prints in the paper type you select.
See page 6 for detailed settings.
Sets the paper size for printing.
Prints without margin.
Prints with a 3 mm margin along the top, bottom, and on both sides.
Prints on upper half part of paper.
4-up Prints multiple photos on one sheet. In 20-up layout, the numbers and shooting dates are
printed.
The size of each photo is adjusted automatically according to the number of photos to print
and the size of paper.
Note:
20-up
When Crop Print is selected, copies of the same photo are printed to the selected layout
on a single sheet of paper. A single copy of the photo is printed when anything other than
the Crop Print is selected.
Prints 16 stickers on one Photo Stickers sheet.
When only single photo is selected, 16 copies of the same photo are printed in the 16-up
layout on a single sheet of paper. When two photos are selected, single copy of each photo
is printed in 16-up layout.
Prints photos with a PRINT Image Framer Tool frame.
Sets the print quality.
Does not print in sepia tone, but in color or gray scale.
Prints in sepia tone.
1. Select the Menu Item.
2. Select the Setting Item.
3. Press the OK button.
(Except when printing with DPOF)
OK