Calls List - Amplicomms Powertel 50 Alarm Plus Operating Instructions Manual

9 Calls List

7
A total of 64 call numbers can be stored in the calls list. The flashing red
LED indicates new calls in the calls list.
Displaying phone numbers in the calls list
y or z
Display messages:
Display
NEW
REPEAT
Out of area
No number
Private call
Storing numbers from the calls list in the phone book
A phone number stored in the calls list can be transferred directly to the
phone book.
y or z
2 sec J
COPY TO MEMORY ,
The phone number is stored in the phone book without a name being as
signed. Then enter a name for the phone number. . Editing entries in
the phone book Page 13.
When the number in the phone book is stored together with a
name, the name entered also appears in the calls list.
Open the calls list and select an entry
Description
The entry in the calls list is new.
The caller in the calls list has called several
times.
The call concerns an international call or it is
from a PBX.
The caller's number is only received in part
or is erroneous. The information on the cal
ler's number is not available.
The caller has suppressed transmission of
his number or the call is from a PBX.
Open the calls list and select an entry
Start the storing process
Confirm the storing process
Service-Hotline: Tel. 0844 800 6503
Deleting phone numbers from the calls list
Deleting phone numbers individually
y or z
• DELETE?
2 sec •
y or z
Deleting all the phone numbers
y or z
2 sec • DELETE ALL?
2 sec •
y or z
Before deleting the phone numbers, check that the entries have
been viewed.
Calls List
Open the calls list and select an entry
Activate the deleting process
Confirm the deleting process
or
Cancel the deleting process
Open the calls list and select an entry
Activate the deleting process
Confirm the deleting process
or
Cancel the deleting process
15