Step 1: Charging The Battery Pack - Sony HDR-CXSOO Operating Manual

I:~etting
started
Step 1: Charging the battery pack
Access lamp
====,====
~ To the wall outlet
1
(wall socket)
1
2
Battery pack
3
~/CHG
(flash/charge)
lamp
II
G')
/'I)
a.
:::J
~
VI
-
Q I
..,
-
/ 'I)
a.
Power cord (Mains lead)
You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your
camcorder.
• You cannot attach any "InfoLITHIUM" battery pack other than H series to your camcorder.
1
2
Turn off your camcorder by closing the LCD screen.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Align the" mark on the DC plug with that on the DC IN jack.
The
~/CHG
(flash/charge) lamp lights up and charging starts. The
~/CHG
(flash/charge)
lamp turns off when the battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
us
13