Table of Contents
Advertisement
10. Click OK to restart the system.
For Windows XP:
10. Click Close to close the System Properties window.
Starting WinDVD
To start WinDVD, complete the following procedure:
1. Click Start.
2. Click Programs.
3. Click InterVideo WinDVD.
4. Click InterVideo WinDVD to open the DVD movie player window.
Notes:
1. Your computer has been configured to provide the highest quality audio and
2. Audio or video streams are decoded by software. The audio and video
Using drive letter access (DLA)
Drive Letter Access (DLA) is provided so that you can write data to DVD-RAM,
DVD-RW, DVD-R, DVD+RW, DVD+R, CD-R, and CD-RW media. DVD-RAM,
DVD-RW, DVD+RW, and CD-RW media can be written to many times, while
DVD-R, DVD+R, and CD-R media can only be formatted and written to once.
To format and write to DVD-RAM, DVD-RW, DVD-R, DVD+RW, DVD+R, CD-R,
or CD-RW media:
1. Insert a disc into the drive.
2. Double-click My Computer. Right-click the Multi-Burner Plus drive letter.
3. Click Format. Formatting a DVD can take up to 90 minutes.
9. Click Close to close System Properties window. A message displays, informing
you that the system settings have changed.
1. Click Start, move the cursor to My Computer, and click on it.
2. Click on View system information under System Tasks.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE. (Double-click Primary IDE if you are using the
ThinkPad A21e computer.)
7. Click the Advanced Settings tab.
8. Select DMA if available as the Transfer Mode.
9. Click OK.
For more information on how to play the DVD movie player, refer to the
WinDVD help information on the Software and User's Guide Super CD. If you
want to watch a DVD movie on your TV, refer to the online information
provided with your computer.
video playback obtainable with the available system resources. You can alter
the default settings by changing the video resolution setting within the Control
Panel. Some systems do not have enough resources to provide full-quality
audio and video playback at all resolution settings. If you experience poor
playback performance, adjust the resolution to a lower setting.
subsystems need to be fully functional and enabled.
Chapter 2. Using the Multi-Burner Plus drive
11
Advertisement
Table of Contents
