Performance Of Measurements - Unitest Hexagon 710 Instruction Manual

/
The key is used to change to the frequency meas-
urement range from all measurement ranges.
For the mA DC measurement range, the display can be set
to percentage indication for current loop measurements
within the range of 4...20 mA.
If the display is not visible or fluctuating during the meas-
urement, the measurement value can be frozen by pressing
the key.

5.0 Performance of Measurements

General Information regarding the Performance of Mea-
surements
Measurements in dangerous proximity of electrical in-
stallations are only to be executed when instructed by
a responsible electrical specialist, and never alone.
Only touch test leads and test probes at handle surface
provided. Never directly touch test probes.
Prior to switching to a different measurement range or
a new type of measurement, always separate connec-
tions from EUT.
(Acceptance) measurements are to be carried out
complying to the respectively valid standards.
Performance of Measurements
47